Access Doors
       Pressure Relief Doors
       Storm Doors
       Partner Door
       Responder Door
       Commercial Doors
       Utility Doors
       Thermal Windows
       Utility Windows
       Wall Panels
       New Products
Commercial Walk Doors
“Meets Uniform Load Structural Requirements for all U.S. coastal building zones.”
5100 & 7100 Series Commercial Walk Doors


Style and Strength
• Rolled edge door panel of 24-gauge
polyester painted galvanized steel creates
a smooth look that will complement your
building
• Rolled steel edges wrap around heavy
internal aluminum (5100 Series) stiles and
rails that bond with the polyurethane foam
to create a seamless rigid panel
• Heavy-duty 16-gauge 3 1/2” wide painted
steel jambs
• 12-gauge stainless steel 4 1/2” x 4” fixed pin
hinges for durability and security

Protection Against the Elements
• High performance replaceable bulb and leaf
weatherseal of extruded SantopreneŽ
remains flexible in all temperature extremes
• Aluminum parting stop in header frame
enhances weather protection
• Bulb and wand AlcrynŽ sweep gives
greater weather resistance over ordinary
PVC sweeps
• R-12 insulation value from a panel of
injected polyurethane foam (2.2 pounds per
cubic foot) protects against external temperatures

Distinctive Details
• 4-way universal swing prevents problems
with last minute jobsite changes
• Low-profile ADA-approved aluminum sill
• Factory prepped with aluminum reinforcing
blocks at lock, deadbolt, panic hardware
and closer locations to allow for flexibility
during installation
• 2 3/4” backset with a 2 1/8” diameter lock
bore hole

Options to Fit Your Needs
ˇ Sizes from 2'0" to 4'0" wide and 6'8 and 7'0"
high available
ˇ Single-glazed and insulated tempered
door lites
ˇ Grids available on insulated 9-Lite and
Fullview Lites
ˇ Crossbuck pattern on both interior
and exterior
ˇ Insulated 1-lite and Insulated Vent Lite
•  Custom Colorization Available

Click here to download Vent Lite Specs

Thermal Barrier to Reduce Wintertime Heat
Loss, Summertime Heat Gain and the Risk of Interior Condensation

• Polypropylene thermal break in the
16-gauge steel jambs
• Reblocks of high density molded urethane
at the lock bore, deadbolt, closer and panic
hardware prep locations
• Pultruded fiberglass stiles and rails create a
thermal break on the rollformed panel

Pultruded Fiberglass
Superior Structure and
Low Thermal Conductivity
Pultruded fiberglass ensures that your door
will hold up to the weather extremes that
Mother Nature emits. This high performance
material is corrosion resistant and electrically
insulative.

AJ Walk Doors comply with all requirements of the 2007 Florida Buiding Code with the exception of HVH Zones to pressures of +55.0/-60.6 (>140 mph coastal wind zones).

To view test data and drawings go to 
http://floridabuilding.org/c/default.aspx
, click on "product Approval", "Find a Product or Application", and enter AJ's application number. # 7445.

Note: all downloads are in PDF format. If you do not
have Adobe Acrobat Reader, Click here for a free copy.


instruction sheet pdf button
5100 & 7100 Installation Instructions
Double Door Installation Instructions
Drawing of Astragal for Double Door Installation







WindowsMedia.gif Watch Video on How To Change Handing

1217 Oak Street • Bloomer, WI 54724 • 1-800-328-9448 • Tel: 715-568-2204 • Fax: 715-568-3099